Ключевые слова: HTS, transformers, pulsed operation, power supply, switches, switching process, modeling, numerical analysis
Ключевые слова: power equipment, FCL resistive, coils pancake, design parameters, HTS, YBCO, coated conductors, impedance, modeling, numerical analysis, FCL flux-coupling
Ключевые слова: pnictides, tapes, wires round, sheath, transport currents, PIT process, ex-situ process, fabrication, hot pressing, hot isostatic pressing, X-ray tomography, magnetization, microstructure, critical caracteristics, Jc/B curves, current density, temperature dependence, magnetic field dependence, pinning force, experimental results
Ключевые слова: LTS, Nb3Sn, strands, fabrication, ITER, cable-in-conduit conductor, current sharing, SULTAN, internal tin method, critical caracteristics, critical current, n-value, ac losses, RRR parameter, new
Ключевые слова: HTS, Bi2212, wires round, critical caracteristics, mechanical properties, mechanical treatment, critical current, LTS, Nb3Sn, NbTi, comparison, experimental results
Ключевые слова: cryogenic systems, cryocoolers, tubes, pulsed operation, experimental results, nitrogen liquid
Liu B., Jin H., Wu Y., Liu S., Long F., Liu F., Jin J., Wang K., Su C., Qin J.-G., Liu H.-J., Yang Z.-Y., Pang Y.-C., Wei Z.-R., Xue T.-J., Li H.-W., Niu E.-W.
Ключевые слова: China, ITER, status, fabrication, coils toroidal, coils poloidal field, central coils, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, critical caracteristics, jacketing, mechanical properties, composition
Ключевые слова: ITER, coils toroidal, cable-in-conduit conductor, Nb3Sn, fabrication, twist-pitch, mechanical properties, tensile tests, loads
Liu B., Li H., Wu Y., Liu H., Liu S., Long F., Yu M., Liu F., Qin J., Wei Z., Xue T., Wang K., Su C.
Ключевые слова: ITER, LTS, NbTi, cable-in-conduit conductor, coils poloidal field, correction coils, fabrication, strands, design parameters, mechanical properties, stress effects, strain effects, tensile tests, jacketing, fatigue behavior, crack formation, critical temperature, current, experimental results, SULTAN
Ключевые слова: ITER, coils toroidal, coils poloidal field, review, China, LTS, strands, NbTi, Nb3Sn, design parameters, status
Ключевые слова: HTS, REBCO, fabrication, substrate LaAlO3, MOCVD process, heat treatment, substrates, oxygenation treatments
Du S.J., Liu X.H., Feng Y., Zhang P.X., Li J.F., Liu W.T., Liu S., Liu J.W., Gao H.X., Yan L.X., H J., Li H.W., Niu E.W.
Ключевые слова: ITER, coils poloidal field, fabrication, LTS, NbTi, critical caracteristics, critical current, n-value, strands, experimental results, new
Ключевые слова: MRI magnets, joints, persistent current mode, switches, LTS, NbTi, joint resistances, fabrication, test results, specific heat, thermal conductivity
Ключевые слова: MRI magnets, shields, design, fabrication, LTS, NbTi, design parameters, stress effects, quench protection, cryogenic systems, cryostat, heat loads
Ключевые слова: ITER, fabrication, cable-in-conduit conductor, LTS, coils toroidal, Nb3Al, design parameters, jacketing
Jewell M.C., Hamada K., Vostner A., Devred A., Weiss K.-P., Boutboul T., Bessette D., Jung A., Pong I., Yu W., Liu S., Sgobba S., Park S.-H., Tronza V., Walsh R.P.*10
Ключевые слова: ITER, LTS, cable-in-conduit conductor, measurement setup, mechanical properties, jacket, fatigue behavior, stress effects
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.